AudioCodes Mediant 3000, User Manual

Page: 730 / 872

User's Manual 730 Document #: LTRT-89729
Mediant 3000
Parameter Description
Note: This parameter can also be configured in a Tel Profile.
[EchoCancellerAggressiveNLP
]
Enables the Aggressive NLP at the first 0.5 second of the call.

[0] = Disable

[1] = (Default) Enable. The echo is removed only in the first
half of a second of the incoming IP signal.
Note: For this parameter to take effect, a device reset is required.
[RTPSIDCoeffNum]
Defines the number of spectral coefficients added to an SID
packet being sent according to RFC 3389.
The valid values are [0] (default), [4] , [6] , [8] and [10] .
53.10.2 Coder Parameters
The coder parameters are described in the table below.
Coder Parameters
Parameter Description
Web: G729EV local MBS
EMS: G729 EV Local MBS
[G729EVLocalMBS]
Defines the maximal bit rate (in kilobits per second - Kbps) that can
be used by the G.729EV coder for a specific channel. This
parameter is defined per channel and may vary between the
parties. The initial generation bit rate is the minimum between the
MaxBitRate and the MBS values.

[0] 8 KBPS (default)

[1] 12 KBPS

[2] 14 KBPS

[3] 16 KBPS

[4] 18 KBPS

[5] 20 KBPS

[6] 22 KBPS

[7] 24 KBPS

[8] 26 KBPS

[9] 28 KBPS

[10] 30 KBPS

[11] 32 KBPS

[15] Undefined
Web: G729EV Maximum Bit
Rate
EMS: G729 EV Max Bit Rate
[G729EVMaxBitRate]
Defines the maximum generation bit rate for all participants in a
session using G.729EV coder. This parameter is defined per
session and is equal for all the parties. The initial generation bit
rate is the minimum between the MaxBitRate and the MBS values.

[0] 8 KBPS (default)

[1] 12 KBPS

[2] 14 KBPS

[3] 16 KBPS

[4] 18 KBPS

[5] 20 KBPS

[6] 22 KBPS

[7] 24 KBPS

[8] 26 KBPS