AudioCodes Mediant 3000, User Manual

Page: 245 / 872

Version 6.6 245 Mediant 3000
User's Manual 17. SIP Definitions
Parameter Description
Password
[Account_Passwo
rd]
Defines the digest MD5 Authentication password.
The valid value is a string of up to 50 characters.
Note: After you click the Apply button, this password is displayed as an
asterisk (*).
Host Name
[Account_HostNa
me]
Defines the Address of Record (AOR) host name. It appears in REGISTER
From/To headers as ContactUser@HostName. For successful registrations,
this host name is also included in the INVITE request's From header URI.
This parameter can be up to 49 characters.
Note: If this parameter is not configured or if registration fails, the 'SIP Group
Name' parameter configured in the IP Group table is used instead.
Register
[Account_Register
]
Enables registration.

[0] No (Default)

[1] Yes
When enabled, the device sends REGISTER requests to the Serving IP
Group. The host name (i.e., host name in SIP From/To headers) and Contact
User (user in From/To and Contact headers) are taken from this table upon
successful registration. See the example below:
REGISTER sip:xyz SIP/2.0
Via: SIP/2.0/UDP 10.33.37.78;branch=z9hG4bKac1397582418
From: <sip:ContactUser@HostName>;tag=1c1397576231
To: <sip: ContactUser@HostName >
Call-ID: 1397568957261200022256@10.33.37.78
CSeq: 1 REGISTER
Contact: <sip:ContactUser@10.33.37.78>;expires=3600
Expires: 3600
User-Agent: Sip-Gateway/v.6.00A.008.002
Content-Length: 0
Notes:

To activate registration, you also need to set the parameter 'Registration
Mode' to 'Per Account' in the Trunk Group Settings table for the specific
Trunk Group.

The Trunk Group account registration is not affected by the parameter
IsRegisterNeeded.

For the IP-to-IP application, you can configure this table so that a specific
IP Group can register to multiple ITSP’s. This is performed by defining
several rows in this table containing the same Served IP Group, but with
different Serving IP Groups, user/password, Host Name and Contact User
parameters.

If registration to an IP Group fails for all the accounts configured in this
table for a specific Trunk Group and if this Trunk Group includes all the
channels in the Trunk Group, the Trunk Group is set to Out-Of-Service if
the parameter OOSOnRegistrationFail is set to 1 (see Proxy &
Registration Parameters on page
246 ).
Contact User
[Account_Contact
User]
Defines the AOR user name. This appears in REGISTER From/To headers
as ContactUser@HostName, and in INVITE/200 OK Contact headers as
ContactUser@<device's IP address>.
Notes:

If this parameter is not configured, the 'Contact User' parameter in the IP
Group table is used instead.

If registration fails, then the user part in the INVITE Contact header