AudioCodes Mediant 3000, User Manual

Page: 118 / 872

User's Manual 118 Document #: LTRT-89729
Mediant 3000

To configure IP network interfaces:
1. Open the IP Settings page ( Configuration tab > VoIP menu > Network submenu > IP
Settings ).
Figure 11-2: IP Settings Page (Single Network Interface)
Note: The IP Settings page appears only in the following circumstances:
•
Upon initial configuration (i.e., IP interfaces have never been configured)
and the device is in Simplex mode.
•
The Multiple Interface Table button has not been clicked in any previous
access to this page and only a single IP address has been configured.
•
The device has been restored to default settings.
If you have clicked the Multiple Interface Table button or have configured multiple
interfaces using any other non-Web management tool, the Multiple Interface
Table page appears instead of the IP Settings page.
2. To access the Multiple Interface table so that you can configure multiple network
interfaces, click the Multiple Interface Table button, located under the Multiple
Interface Settings group; a confirmation message box appears:
Figure 11-3: Confirmation Message for Accessing the Multiple Interface Table