AudioCodes Mediant 3000, User Manual

Page: 677 / 872

Version 6.6 677 Mediant 3000
User's Manual 53. Configuration Parameters Reference
Parameter Description
[SSHMaxPayloadSize]
Web: Max Binary Packet
Size
EMS: SSH Max Binary
Packet Size
[SSHMaxBinaryPacket
Size]
Defines the maximum packet size (in bytes) for SSH packets.
The valid value is 582 to 35000. The default is 35000.
EMS: Telnet SSH Max
Sessions
[SSHMaxSessions]
Defines the maximum number of simultaneous SSH sessions.
The valid range is 1 to 2. The default is 2 sessions.
Web: Enable Last Login
Message
[SSHEnableLastLogin
Message]
Enables message display in SSH sessions of the time and date of the
last SSH login. The SSH login message displays the number of
unsuccessful login attempts since the last successful login.

[0] Disable

[1] Enable (default)
Note: The last SSH login information is cleared when the device is reset.
Web: Max Login
Attempts
[SSHMaxLoginAttempt
s]
Defines the maximum SSH login attempts allowed for entering an
incorrect password by an administrator before the SSH session is
rejected.
The valid range is 1 to 3. the default is 3.
53.4.6 IPSec Parameters
The Internet Protocol security (IPSec) parameters are described in the table below.
IPSec Parameters
Parameter Description
IPSec Parameters
Web: Enable IP Security
EMS: IPSec Enable
[EnableIPSec]
Enables IPSec on the device.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Web: IKE Certificate Ext
Validate
[IKEcertificateExtValida
te]
Enables the validation of the extensions (keyUsage and
extentedKeyUsage) of peer certificates. This validation ensures that the
signing CA is authorized to sign certificates and that the end-entity
certificate is authorized to negotiate a secure IPSec connection.

[ [0] Disable (default)

[1] Enable
IPSec Associations Table
Web: IP Security
Associations Table
EMS: IPSec SA Table
[IPSecSATable]
This table parameter defines the IPSec SA table. This table allows you to
configure the Internet Key Exchange (IKE) and IP Security (IPSec)
protocols. You can define up to 20 IPSec peers.
The format of this parameter is as follows:
[ IPsecSATable ]
FORMAT IPsecSATable_Index =
IPsecSATable_RemoteEndpointAddressOrName,