AudioCodes Mediant 3000, User Manual

Page: 446 / 872

User's Manual 446 Document #: LTRT-89729
Mediant 3000

To configure Condition rules:
1. Open the Condition Table page ( Configuration tab > VoIP menu > SBC > Routing
SBC > Condition Table ).
2. Click the Add button; the following dialog box appears:
Figure 29-6: Condition Table Page - Add Record Dialog Box
3. Configure the rule as required. For a description of the parameters, see the table
below.
4. Click Submit .
The figure below shows an example of the Condition table configured with the following
rules:

Index 1: Incoming SIP dialog that is classified as belonging to a User-type IP Group.

Index 2: Incoming SIP dialog with a SIP Via header.

Index 3: Incoming SIP dialog with 101 as the user part in the SIP From header.
Figure 29-7: Condition Table Page
Condition Table Parameters Description
Parameter Description
Condition
[ConditionTable_Condi
tion]
Defines the Condition rule of the SIP message.
The valid value is a string.
Note: User and host parts must be enclosed in single quotes.
Description
[ConditionTable_Descri
ption]
Defines a brief description of the Condition rule.
29.4.3 Configuring SBC IP-to-IP Routing
The IP-to-IP Routing table enables you to configure up to 200 SBC IP-to-IP routing rules.
This table provides enhanced IP-to-IP call routing capabilities for routing received SIP
dialog messages (e.g., INVITE) to a destination IP address.
Configuration of IP-to-IP routing rules includes two areas:

Matching Characteristics: Defines the characteristics of the incoming SIP dialog
message (e.g., IP Group from which the message is received).

Operation: Defines the action that is done if the incoming call matches the
characteristics of the rule (i.e., routes the call to the specified destination).