AudioCodes Mediant 3000, User Manual

Page: 127 / 872

Version 6.6 127 Mediant 3000
User's Manual 11. Network

To configure static IP routing:
1. Open the IP Routing Table page ( Configuration tab > VoIP menu > Network
submenu > IP Routing Table ).
Figure 11-5: IP Routing Table Page
2. In the Add a new table entry table, add a new static routing rule according to the
parameters described in the table below.
3. Click Add New Entry ; the new routing rule is added to the IP routing table.
To delete a routing rule from the table, select the 'Delete Row' check box corresponding to
the required routing rule, and then click
Delete Selected Entries .
Notes:
•
You can delete only inactive routing rules.
•
The IP Routing table can also be configured using the table ini file
parameter, StaticRouteTable.
IP Routing Table Description
Parameter Description
Destination IP Address
[StaticRouteTable_Destinatio
n]
Defines the IP address of the destination host/network. The
destination can be a single host or a whole subnet, depending on
the Prefix Length configured for this routing rule.
Prefix Length
[StaticRouteTable_PrefixLen
gth]
Defines the Classless Inter-Domain Routing (CIDR)-style
representation of a dotted-decimal subnet notation, of the
destination host/network. The CIDR-style representation uses a
suffix indicating the number of bits that are set in the dotted-
decimal format. For example, 16 is synonymous with subnet
255.255.0.0.