AudioCodes Mediant 3000, User Manual

Page: 462 / 872

User's Manual 462 Document #: LTRT-89729
Mediant 3000
Parameter Description
Destination IP Group ID
[IPOutboundManipulati
on_DestIPGroupID]
Defines the IP Group to where the INVITE is to be sent.
For any Destination IP Group, enter the value -1.
Source Username Prefix
[IPOutboundManipulati
on_SrcUsernamePrefix
]
Defines the prefix of the source SIP URI user name (usually in the From
header).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see 'Dialing Plan Notation for Routing and Manipulation' on
page
641 .
Source Host
[IPOutboundManipulati
on_SrcHost]
Defines the source SIP URI host name - full name (usually in the From
header).
For any host name, enter the asterisk "*" symbol (default).
Destination Username
Prefix
[IPOutboundManipulati
on_DestUsernamePrefi
x]
Defines the prefix of the destination SIP URI user name (usually in the
Request-URI).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see 'Dialing Plan Notation for Routing and Manipulation' on
page
641 .
Destination Host
[IPOutboundManipulati
on_DestHost]
Defines the destination SIP URI host name - full name (usually in the
Request URI).
For any host name, enter the asterisk "*" symbol (default).
Request Type
[IPOutboundManipulati
on_RequestType]
Defines the SIP request type to which the manipulation rule is applied.

[0] All = (Default) all SIP messages.

[1] INVITE = All SIP messages except REGISTER and SUBSCRIBE.

[2] REGISTER = Only SIP REGISTER messages.

[3] SUBSCRIBE = Only SIP SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except REGISTER.
ReRoute IP Group ID
[IPOutboundManipulati
on_ReRouteIPGroupID]
Defines the IP Group that initiated (sent) the SIP redirect response (e.g.,
3xx) or REFER message. This parameter is typically used for re-routing
requests (e.g., INVITEs) when interworking is required for SIP 3xx
redirect responses or REFER messages.
The default is -1 (i.e., not configured).
Notes:

This parameter functions together with the 'Call Trigger' parameter
(see below).

For more information on interworking of SIP 3xx redirect responses or
REFER messages, see 'Interworking SIP 3xx Redirect Responses' on
page
420 and 'Interworking SIP REFER Messages' on page 423 ,
respectively.
Call Trigger
[IPOutboundManipulati
on_Trigger]
Defines the reason (i.e, trigger) for the re-routing of the SIP request:

[0] Any = (Default) Re-routed for all scenarios (re-routes and non-re-
routes).

[1] 3xx = Re-routed if it triggered as a result of a SIP 3xx response.

[2] REFER = Re-routed if it triggered as a result of a REFER request.

[3] 3xx or REFER = Applies to options [1] and [2].

4] Initial only = Regular requests that the device forwards to a
destination. In other words, re-routing of requests triggered by the