AudioCodes Mediant 3000, User Manual

Page: 659 / 872

Version 6.6 659 Mediant 3000
User's Manual 53. Configuration Parameters Reference
Parameter Description
Web: Trap Enable
[SNMPManagerTrapSendingE
nable_x]
Enables the sending of traps to the corresponding SNMP
manager.

[0] Disable = Sending is disabled.

[1] Enable = (Default) Sending is enabled.
Web: Trap User
[SNMPManagerTrapUser_x]
Defines the SNMPv3 USM user or SNMPv2 user to associate
with the trap destination. This determines the trap format,
authentication level, and encryption level. By default, it is
associated with the SNMPv2 user (SNMP trap community string).
The valid value is a string.
Web: Trap Manager Host Name
[SNMPTrapManagerHostNam
e]
Defines an FQDN of the remote host used as an SNMP manager.
The resolved IP address replaces the last entry in the Trap
Manager table (defined by the SNMPManagerTableIP parameter)
and the last trap manager entry of snmpTargetAddrTable in the
snmpTargetMIB. For example: 'mngr.corp.mycompany.com'.
The valid range is a string of up to 99 characters.
SNMP Community String Parameters
Community String
[SNMPReadOnlyCommunityS
tring_x]
Defines up to five read-only SNMP community strings (up to 19
characters each). The default string is 'public'.
Community String
[SNMPReadWriteCommunity
String_x]
Defines up to five read/write SNMP community strings (up to 19
characters each). The default string is 'private'.
Trap Community String
[SNMPTrapCommunityString]
Defines the Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
SNMP Trusted Managers Table
Web: SNMP Trusted Managers
[SNMPTrustedMgr_x]
Defines up to five IP addresses of remote trusted SNMP
managers from which the SNMP agent accepts and processes
SNMP Get and Set requests.
Notes:

By default, the SNMP agent accepts SNMP Get and Set
requests from any IP address, as long as the correct
community string is used in the request. Security can be
enhanced by using Trusted Managers, which is an IP address
from which the SNMP agent accepts and processes SNMP
requests.

If no values are assigned to these parameters any manager
can access the device.

Trusted managers can work with all community strings.
SNMP V3 Users Table
Web/EMS: SNMP V3 Users
[SNMPUsers]
This para meter table defines SNMP v3 users. The format of this
parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
SNMPUsers_Group;
[\SNMPUsers ]