AudioCodes Mediant 3000, User Manual

Page: 720 / 872

User's Manual 720 Document #: LTRT-89729
Mediant 3000
Parameter Description
Web/EMS: Media IP
Version Preference
[MediaIPVersionPrefere
nce]
Determines the preferred RTP media IP addressing version for outgoing
SIP calls. This is indicated in the "c=" field (Connection Information) of
the SDP.

[0] Only IPv4 = (Default) offer includes only IPv4 media IP
addresses.

[1] Only IPv6 = offer includes only IPv6 media IPs addresses.

[2] Prefer IPv4 = offer includes both IPv4 and IPv6 media IP
addresses, but the first media is IPv4.

[3] Prefer IPv6 = offer includes both IPv4 and IPv6 media IP
addresses, but the first media is IPv6.
Notes:

This parameter is applicable only when the device offers an SDP.

The IP addressing version is determined according to the first SDP
"m=" field.

This parameter can be configured per IP Profile, using the parameter
IPProfile (see Configuring IP Profiles on page
263 ).
Web/EMS: SIT Q850
Cause
[SITQ850Cause]
Defines the Q.850 cause value specified in the SIP Reason header that
is included in a 4xx response when a Special Information Tone (SIT) is
detected on an IP-to-Tel call.
The valid range is 0 to 127. The default is 34.
Note: For mapping specific SIT tones, you can use the
SITQ850CauseForNC, SITQ850CauseForIC, SITQ850CauseForVC,
and SITQ850CauseForRO parameters.
Web/EMS: SIT Q850
Cause For NC
[SITQ850CauseForNC]
Defines the Q.850 cause value specified in the SIP Reason header that
is included in a 4xx response when SIT-NC (No Circuit Found Special
Information Tone) is detected from the TelPSTN for IP-to-Tel calls.
The valid range is 0 to 127. The default is 34.
Notes:

When not configured (i.e., default), the SITQ850Cause parameter is
used.

This parameter is applicable only to FXO interfaces.
Web/EMS: SIT Q850
Cause For IC
[SITQ850CauseForIC]
Defines the Q.850 cause value specified in the SIP Reason header that
is included in a 4xx response when SIT-IC (Operator Intercept Special
Information Tone) is detected from the PSTN for IP-to-Tel calls.
The valid range is 0 to 127. The default is -1 (not configured).
Note: When not configured (i.e., default), the SITQ850Cause parameter
is used.
Web/EMS: SIT Q850
Cause For VC
[SITQ850CauseForVC]
Defines the Q.850 cause value specified in the SIP Reason header that
is included in a 4xx response when SIT-VC (Vacant Circuit - non-
registered number Special Information Tone) is detected from the PSTN
for IP-to-Tel calls.
The valid range is 0 to 127. The default is -1 (not configured).
Note: When not configured (i.e., default), the SITQ850Cause parameter
is used.
Web/EMS: SIT Q850
Cause For RO
[SITQ850CauseForRO]
Defines the Q.850 cause value specified in the SIP Reason header that
is included in a 4xx response when SIT-RO (Reorder - System Busy
Special Information Tone) is detected from the PSTN for IP-to-Tel calls.
The valid range is 0 to 127. The default is -1 (not configured).
Note: When not configured (i.e., default), the SITQ850Cause parameter