AudioCodes Mediant 3000, User Manual

Page: 437 / 872

Version 6.6 437 Mediant 3000
User's Manual 29. SBC Configuration

To configure Admission Control rules:
1. Open the Admission Control page ( Configuration tab > VoIP menu > SBC >
Admission Control ).
2. Click the Add button; the following dialog box appears:
Figure 29-2: Admission Control Page - Add Record Dialog Box
3. Configure the rule as required. For a description of the parameters, see the table
below.
4. Click Submit to apply your changes.
Admission Control Parameters
Parameter Description
Limit Type
CLI: limit-type
[SBCAdmissionControl
_LimitType]
Defines the entity to which the rule applies.

[0] IP Group (default)

[1] SRD
IP Group ID
[SBCAdmissionControl
_IPGroupID]
Defines the IP Group to which you want to apply the rule. To apply the
rule to all IP Groups, set this parameter to -1 (default).
Note: This parameter is applicable only if 'Limit Type' is set to IP Group .
SRD ID
[SBCAdmissionControl
_SRDID]
Defines the SRD to which you want to apply the rule. To apply the rule to
all SRDs, set this parameter to -1 (default).
Note: This parameter is applicable only if 'Limit Type' is set to SRD .
Request Type
[SBCAdmissionControl
_RequestType]
Defines the SIP dialog-initiating request type to which you want to apply
the rule (not the subsequent requests that can be of different type and
direction).

[0] All = (Default) Includes the total number of all dialogs.

[1] INVITE

[2] SUBSCRIBE

[3] Other
Request Direction Defines the direction of the SIP request to which the rule applies.