AudioCodes Mediant 3000, User Manual

Page: 359 / 872

Version 6.6 359 Mediant 3000
User's Manual 24. Routing
Example of Tel-to-IP Source Phone Number Manipulation Rules
Parameter Rule 1 Rule 2 Rule 3 Rule 4 Rule 5 Rule 6 Rule 7 Rule 8 Rule 9
Src. IP
Group ID - - - - - 2 - - -
Src. Trunk
Group ID * 0 1 - - - - - -
Src. Host
Prefix - - - - - domain.co
m
- - -
Src. Trunk
Group ID - - * 1 - - * * *
Dest.
Phone
Prefix 10 10 20 [5, 7-9] 00 * 100 100 100
Source
Phone
Prefix 100 100 * * * * * * *
Dest. IP
Address 10.33.
45.63
10.33.45.5
0
- domain.co
m
0.0.0.0 10.33.45.6
5
10.33.45.6
8
10.33.45.6
7
domain.co
m
Dest IP
Group ID - - 1 - - - - - -
IP Profile
ID 1 1 - - - - - - -
Cost
Group ID Week
end
Weekend
_B
- - - - - - -
Forking
Group - - - - 1 2 1
Tel-to-IP / Outbound IP Routing Table Parameters
Parameter Description
Matching Call Characteristics
Web/EMS: Tel to IP
Routing Mode
[RouteModeTel2IP]
Determines whether to route received calls to an IP destination before or
after manipulation of the destination number.

[0] Route calls before manipulation = Calls are routed before the number
manipulation rules are applied (default).

[1] Route calls after manipulation = Calls are routed after the number
manipulation rules are applied.
Notes:

This parameter is not applicable if outbound proxy routing is used.

For number manipulation, see 'Configuring Source/Destination Number
Manipulation' on page
331 .
Web: Src. IP Group
ID
EMS: Source IP
Group ID
[PREFIX_ SrcIPGrou
Defines the IP Group from where the incoming IP call is received. Typically,
the IP Group of an incoming INVITE is determined according to the Inbound
IP Routing Table.
Notes: