AudioCodes Mediant 3000, User Manual

Page: 194 / 872

User's Manual 194 Document #: LTRT-89729
Mediant 3000

To select a DSP Template(s):
1. To use a single DSP Template:
a. Open the General Settings page ( Configuration tab > VoIP menu > Media >
General Media Settings ).
Figure 13-13: Defining Single DSP Template in General Settings Page
b. In the 'DSP Version Template Number' field, enter the required DSP Template
number.
c. Click Submit .
d. Reset the device with a flash burn for the settings to take effect (see 'Saving
Configuration' on page
520 ).
2. To use two DSP Templates:
a. Open the DSP Templates page (Configuration tab > VoIP menu > Media
submenu > DSP Templates).
b. Click the Add button; the following dialog box appears:
Figure 13-14: DSP Templates Page - Add Record Dialog Box
c. Configure the parameters as required. For a description of the parameters, see
the table below.
d. Click Submit.
e. Reset the device with a flash burn for the settings to take effect (see Saving
Configuration on page
520 ).
DSP Templates Table Parameter Descriptions
Parameter Description
DSP Template Number
[DspTemplates_DspTe
mplateNumber] Define the DSP Template number.
DSP Resources
Percentage
[DspTemplates_DspRe
sourcesPercentage] Define the percentage of DSP resources allocated for the specified
template.
The default is 50%.
13.7 Configuring Media Realms
The Media Realm Table page allows you to define a pool of up to 64 SIP media interfaces,
termed
Media Realms . Media Realms allow you to divide a Media-type interface, which is
configured in the Multiple Interface table, into several realms, where each realm is
specified by a UDP port range. You can also define the maximum number of sessions per