AudioCodes Mediant 3000, User Manual

Page: 629 / 872

Version 6.6 629 Mediant 3000
User's Manual 51. Testing SIP Signaling Calls
Parameter Description
SRD
[Test_Call_SRD]
Defines the SRD for the endpoint.
The default is SRD 0.
Note: This parameter is applicable only if the 'Route By' parameter is set
any option except [1] (IP Group).
Application Type
[Test_Call_Applicat
ionType]
Defines the application type for the endpoint. This, in effect, associates the
IP Group and SRD to a specific SIP interface.

[0] GW & IP2IP (default)

[2] SBC
Authentication Tab
Note: These parameters are applicable only if the test endpoint is set to Caller (see the 'Call Party'
parameter).
Auto Register
[Test_Call_AutoRe
gister]
Enables automatic registration of the endpoint. The endpoint can register to
the device itself or to the 'Destination Address' or 'IP Group ID' parameter
settings (see above).

[0] False (default)

[1] True
User Name
[Test_Call_UserNa
me]
Defines the authentication username.
By default, no username is defined.
Password
[Test_Call_Passwo
rd]
Defines the authentication password.
By default, no password is defined.
Test Settings Tab
Call Party
[Test_Call_CallPart
y]
Defines whether the test endpoint is the initiator or receiving side of the test
call.

[0] Caller (default)

[1] Called
Maximum Channels
for Session
[Test_Call_MaxCha
nnels]
Defines the maximum number of concurrent channels for the test session.
For example, if you have configured an endpoint "101" and you set this
parameter to "3", the device automatically creates three simulated endpoints
- "101", "102" and "103" (i.e., consecutive endpoint URIs are assigned).
The default is 1.
Call Duration
[Test_Call_CallDur
ation]
Defines the call duration (in seconds).
The valid value is -1 to 100000. The default is 20. A value of 0 means
infinite. A value of -1 means that the parameter value is automatically
calculated according to the values of the 'Calls per Second' and 'Maximum
Channels for Session' parameters.
Note: This parameter is applicable only if 'Call Party' is set to Caller .
Calls per Second
[Test_Call_CallsPer
Second]
Defines the number of calls per second.
Note: This parameter is applicable only if 'Call Party' is set to Caller .