AudioCodes Mediant 3000, User Manual

Page: 679 / 872

Version 6.6 679 Mediant 3000
User's Manual 53. Configuration Parameters Reference
Parameter Description
[OCSPServerIP] The default IP address is 0.0.0.0.
Web: Secondary Server
IP
[OCSPSecondaryServe
rIP]
Defines the IP address (in dotted-decimal notation) of the secondary
OCSP server (optional).
The default IP address is 0.0.0.0.
Web: Server Port
EMS: OCSP Server Port
[OCSPServerPort]
Defines the OCSP server's TCP port number.
The default port number is 2560.
Web: Default Response
When Server
Unreachable
EMS: OCSP Default
Response
[OCSPDefaultRespons
e]
Determines the default OCSP behavior when the server cannot be
contacted.

[0] Reject = (Default) Rejects peer certificate.

[1] Allow = Allows peer certificate.
53.4.8 IDS Parameters
The Intrusion Detection System (IDS) parameters are described in the table below.
Table 53-1: IDS Parameters
Parameter Description
Web: Intrusion Detection
System (IDS)
CLI: enable-ids
[EnableIDS]
Enables the IDS feature.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
CLI: ids-clear-period
[IDSAlarmClearPeriod]
Defines the interval (in seconds) after which an IDS alarm is cleared from
the Active Alarms table if no thresholds are crossed during this time.
However, this "quiet" period must be at least twice the Threshold Window
value. For example, if IDSAlarmClearPeriod is set to 20 sec and the
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
IDS Policy Table
Web: IDS Policy Table
[IDSPolicy]
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of this table, see 'Configuring IDS Policies' on
page
157 .
IDS Rule Table