AudioCodes Mediant 3000, User Manual

Page: 777 / 872

Version 6.6 777 Mediant 3000
User's Manual 53. Configuration Parameters Reference
Parameter Description
Web: Generate Digit On Time
[CASStateMachineGenerate
DigitOnTime]
Generates digit on-time (in msec).
The value must be a positive value. The default is -1.
Web: Generate Inter Digit Time
[CASStateMachineGenerateI
nterDigitTime]
Generates digit off-time (in msec).
The value must be a positive value. The default is -1.
Web: DTMF Max Detection
Time
[CASStateMachineDTMFMax
OnDetectionTime]
Detects digit maximum on time (according to DSP detection
information event) in msec units.
The value must be a positive value. The default is -1.
Web: DTMF Min Detection
Time
[CASStateMachineDTMFMin
OnDetectionTime]
Detects digit minimum on time (according to DSP detection
information event) in msec units. The digit time length must be
longer than this value to receive a detection. Any number may be
used, but the value must be less than
CasStateMachineDTMFMaxOnDetectionTime.
The value must be a positive value. The default is -1.
Web: MAX Incoming Address
Digits
[CASStateMachineMaxNumO
fIncomingAddressDigits]
Defines the limitation for the maximum address digits that need to
be collected. After reaching this number of digits, the collection of
address digits is stopped.
The value must be an integer. The default is -1.
Web: MAX Incoming ANI Digits
[CASStateMachineMaxNumO
fIncomingANIDigits]
Defines the limitation for the maximum ANI digits that need to be
collected. After reaching this number of digits, the collection of
ANI digits is stopped.
The value must be an integer. The default is -1.
Web: Collect ANI
[CASStateMachineCollectAN
I]
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can enable the state
machine to collect ANI or discard ANI.

[0] No = Don't collect ANI.

[1] Yes = Collect ANI.

[-1] Default = Default value.
Web: Digit Signaling System
[CASStateMachineDigitSigna
lingSystem]
Defines which Signaling System to use in both directions
(detection\generation).

[0] DTMF = DTMF signaling.

[1] MF = (Default) MF signaling.

[-1] Default = Default value.
53.11.6.4 ISDN Parameters
The ISDN parameters are described in the table below.
ISDN Parameters
Parameter Description
Web: ISDN Termination Side
EMS: Termination Side
[TerminationSide]
Determines the ISDN termination side.

[0] User side = (Default) ISDN User Termination Equipment
(TE) side.

[1] Network side = ISDN Network Termination (NT) side.