AudioCodes Mediant 3000, User Manual

Page: 449 / 872

Version 6.6 449 Mediant 3000
User's Manual 29. SBC Configuration
2. Click the Add button; the following dialog box appears:
Figure 29-9: IP-to-IP Routing Table - Add Record Dialog Box
3. Configure the rule as required. For a description of the parameters, see the table
below.
4. Click Submit .
IP-to-IP Routing Table Parameters Description
Parameter Description
Matching Characteristics
Source IP Group ID
[IP2IPRouting_ SrcIPGro
upID]
Selects the IP Group from where the IP-to-IP call originated. Typically,
the IP Group of an incoming SIP dialog is determined (or classified)
using the ‘Classification’ table (see Configuring Classification Rules on
page
440 ). If not used (i.e., any IP Group), simply leave the field empty.
The default is -1.
Source Username Prefix
[IP2IPRouting_SrcUser
namePrefix]
Defines the prefix of the user part of the incoming SIP dialog's source
URI (usually the From URI). You can use special notations for denoting
the prefix. For example, to denote any prefix, use the asterisk (*) symbol;
to denote calls without a user part in the URI, use the $ sign. For
available notations, see 'Dialing Plan Notation for Routing and
Manipulation' on page
641 .
The default is * (i.e., any prefix).
Source Host
[IP2IPRouting_SrcHost
]
Defines the host part of the incoming SIP dialog's source URI (usually
the From URI). If this rule is not required, leave the field empty. To
denote any host name, use the asterisk (*) symbol (default).
Destination Username
Prefix
[IP2IPRouting_DestUse
rnamePrefix]
Defines the prefix of the incoming SIP dialog's destination URI (usually
the Request URI) user part. You can use special notations for denoting
the prefix. For example, to denote any prefix, use the asterisk (*) symbol;
to denote calls without a user part in the URI, use the $ sign. For