AudioCodes Mediant 3000, User Manual

Page: 119 / 872

Version 6.6 119 Mediant 3000
User's Manual 11. Network
3. Click OK; the Multiple Interface Table page appears:
Figure 11-4: Multiple Interface Table
4. In the 'Add Index' field, enter the desired index number for the new interface, and then
click
Add Index ; the index row is added to the table.
5. Configure the interface according to the table below.
6. Click the Apply button; the interface is added to the table and the Done button
appears.
7. Click Done to validate the interface. If the interface is not valid (e.g., if it overlaps with
another interface in the table or if it does not adhere to the other rules as summarized
in 'Multiple Interface Table Configuration Summary and Guidelines' on page
122 ), a
warning message is displayed.
8. Save the changes to flash memory and reset the device (see 'Saving Configuration' on
page
520 ).
To view configured network interfaces that are currently active, click the IP Interface Status
Table button. For more information, see Viewing Active IP Interfaces on page 582 .
Multiple Interface Table Parameters Description
Parameter Description
Table parameters
Index
[InterfaceTable_Index
]
Table index row of the interface.
The range is 0 to 31.
Web: Application Type
EMS: Application
Types
[InterfaceTable_Appli
cationTypes]
Defines the applications allowed on the interface.

[0] OAMP = Operations, Administration, Maintenance and Provisioning
(OAMP) applications (e.g., Web, Telnet, SSH, and SNMP).

[1] Media = Media (i.e., RTP streams of voice).

[2] Control = Call Control applications (e.g., SIP).

[3] OAMP + Media = OAMP and Media applications.

[4] OAMP + Control = OAMP and Call Control applications.

[5] Media + Control = Media and Call Control applications.

[6] OAMP + Media + Control = All application types are allowed on the
interface.
Note: For valid configuration, see Multiple Interface Table Configuration
Rules on page 122 .
Web: Interface Mode
[InterfaceTable_Interfa
ceMode] Defines the method that the interface uses to acquire its IP address.

[3] IPv6 Manual Prefix = IPv6 manual prefix IP address assignment.
The IPv6 prefix (higher 64 bits) is set manually while the interface ID
(the lower 64 bits) is derived from the device's MAC address.

[4] IPv6 Manual = IPv6 manual IP address (128 bits) assignment.

[10] IPv4 Manual = IPv4 manual IP address (32 bits) assignment.
Note: For valid configuration, see Multiple Interface Table Configuration