AudioCodes Mediant 3000, User Manual

Page: 547 / 872

Version 6.6 547 Mediant 3000
User's Manual 41. Software Upgrade
•
On the toolbar, click Device Actions , and then choose Software Upgrade
Wizard .
Figure 41-4: Start Software Upgrade Wizard Screen
3. Click the Start Software Upgrade button; the wizard starts, requesting you to
browses to a .cmp file for uploading.
Note: At this stage, you can quit the Software Update Wizard, by clicking Cancel
, without requiring a device reset. However, once you start uploading a
cmp file, the process must be completed with a device reset. If you choose to
quit the process in any of the subsequent pages, the device resets.
4. Click the Browse button, navigate to the .cmp file, and then click Load File ; a
progress bar appears displaying the status of the loading process. When the .cmp file
is successfully loaded to the device, a message appears notifying you of this.
5. If your device is in HA mode, select one of the following options:
•
Hitless Upgrade: (Default) To perform a Hitless Upgrade (non-traffic effecting
upgrade), whereby the upgrade process begins only after all current calls have
been terminated. For a description of the process, see Hitless Software Upgrade
on page
549 .
•
System Reset Upgrade: Both blades immediately reset with the newly loaded
.cmp file.
Note: If you select Hitless Upgrade, you can upload only a .cmp file (auxiliary files
and ini files cannot be uploaded as well).
6. If you want to load only a .cmp file, then click the Reset button to reset the
device with the newly loaded .cmp file, utilizing the existing configuration ( ini ) and
auxiliary files. To load additional files, skip to the next Step.