Working With Online Devices
133
NetLinx Studio (v2.4 or higher)
NetLinx Diagnostics - URL Lists
Use the URL Listing dialog to create a URL List for the specified master. The URL List identifies
all NetLinx devices present in the same System as the Master that you are connected to.
You must enter a URL for each device in the System before you can use ID Mode on other devices.
Creating a URL List
1.
Select
Diagnostics > URL Listing
(or click the toolbar button) to access the URL Listing
dialog.
2.
Enter the
System
and
Device
numbers for the Master that you are connected to in the
appropriate text boxes. The range is 0-65535.
3.
To add a device to the URL List, click
Add
. This opens the Add URL dialog.
4.
Enter the web address (URL or IP Address) of the device in the URL text box and click
OK
to
return to the URL List dialog.
5.
Initially the connection status reads
Looking up URL
. Once found, the new device appears in
the URL List with its IP Port assignment =
1319
.
6.
Click
Get URL List
to refresh the URL List after adding a device.
7.
Repeat steps 1-5 for as many additional devices as are required.
To retrieve a list of all URL's in the list, click
Get IRL List
. The URL List is populated
with all previously set URL's.
To remove a URL from the list, select the URL and click
Remove
.
To clear all URL's from the list, click
Remove All
.
Only devices defined in the URL list will appear in the On-line device tree (with the
exception of the Master that you are connected to).
If you enter a valid URL for a device, the program generates the device's IP Address.
Do not change the IP Port number! An IP Address is assigned to this URL and is
displayed in the IP Address column.
Summary of Contents for NETLINX STUDIO V2.4
