AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 180

Page: 180 / 200

Communications and File Transfers

168

NetLinx Studio (v2.4 or higher)

Verify that you have connected to the desired Master by checking the information in displayed

in the Configuration window.

Click the Communication Settings command button to access the Communication Settings

dialog.

Click to select the Authentication Required option. This enables the User Name and Password

command button.

Click the User Name and Password button to access the Master Controller User Name and

Password dialog.

Enter the User Name and Password that will be required to establish communication with this

Master (as long as the Authentication Required option is selected).

The User Name and Password must each be between 4 and 20 characters long.

Click OK to save your changes and return to the Communication Settings dialog.

Click OK to save your changes and return to the Master Communication Settings dialog.

Now that security has been applied to the Master, note that the Master Security Status icon in the

Status Bar changes to indicate that the Master is "locked" (FIG. 29).

Master Controller User Name and Password Dialog

Click the

User Name and Password

command button (in the Communication Settings dialog) to

access the Master Controller User Name and Password dialog. Use this dialog to specify a User

Name and a Password for the secured NetLinx Master (this option is only enabled if the

Authentication Required

option is enabled).

The

User Name

and

Password

must each be between 4 and 20 characters long.

Once these have been applied, any user must provide both correctly in order to establish

communication with the Master. If the User Name and Password are not entered

correctly, the program will indicate failed authentication status in the Connection Status

and Reboot the Master Controllers dialogs.

Applying Security To Individual File Transfers

In addition to the security for NetLinx Masters that can be enabled per system, NetLinx Studio

(v2.3 or higher) also allows you to apply security to individual file transfers via options in the File

Transfer dialog.

With security enabled on a file transfer operation, users will be required to provide the correct User

Name and Password in order to transfer the file to/from the Master.

FIG. 29

Master Security Status icons

= Master is secured

= Master is unsecured

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands