AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 41

Page: 41 / 200

Working With Workspace Files

NetLinx Studio (v2.4 or higher)

Workspace Filename To Create

text field to change the name and target directory for the

resulting AXW file, if necessary.

Use the radio buttons in the

Export Options

area of the dialog to specify exporting the

Full

Workspace

(all Projects and Systems included), or only the currently active Project (

Only

Active Project

) or the currently active System (

Only Active System

). By default, the program is

configured to export the entire Workspace file.

Use the checkboxes in the

Export Options

area to select additional options as desired:

Select the

Include User IRN Database(s)

checkbox to include any user-defined .IRN (IR

database) files in the resulting AXW file. If the selected Workspace file does not include

any user-defined IRN files, this option is disabled.

Select the

Include Module Files that are not part of the Workspace

checkbox to

include AXS (*.TKO) and Duet (*.JAR) Module files that are needed for a successful

NetLinx compile and link, but have not been added to the Workspace. Module files are

found by searching the "Module Files" directories defined on the NetLinx Compiler tab

of the Preferences dialog. If the selected Workspace file does not utilize Module files, this

option is disabled.

Select the

Exclude All Source Code/AXS and Duet Module Files

checkbox to exclude

source code and Duet module files from the resulting AXW file. Excluding AXS/AXI

files will result in device mappings of the exported AXW file to be set to "Custom". Since

no source files will be part of the exported AXW, all device mappings will need to be

resolved in the newly created APW file.

Naturally, the previous two options are mutually exclusive. If you select one, the other is

disabled.

Select the

Include the Compiled TKN/TOK File

checkbox to include the compiled

TKN/TOK file in the exported APW file.

Select the

Include the Complied SRC File

checkbox to include the compiled SRC file

(in addition to the compiled TKN/TOK file). Note that this option is only enabled if the

Include the compiled TKN/TOK file option is selected.

The Progress bar indicates the progress of the export operation.

Once the export operation is done, detailed results of the operation are listed in the Export

Workspace Files Report dialog.

Importing Exported ("To Go") Workspace Files

Select

Project > Import

From Exported Workspace File (or click the toolbar button) to access

the Select AXW File dialog.

Locate and select the desired AXW file, and click

Open

In the Import From Exported Workspace File dialog, the file selected in the Select AXW File

dialog is listed in the

AXW File to Extract From

field. Use the browse button to locate and

select a different file, if necessary.

The target directory indicated in the

Extract To

field matches the source directory for the

selected file by default. Use the browse button to locate and select a different target directory

for the Workspace file, if necessary.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands