AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 171

Page: 171 / 200

Communications and File Transfers

159

NetLinx Studio (v2.4 or higher)

After several seconds, the panel should appear in the online device tree, listed as

Virtual

NetLinx Master

. Once you can see the device online, you may transfer panel files directly to

and from the G4 device.

Step 3: Device Mapping

Setting Device-File Mapping Information

Every time you select a file (to send or receive) via the Select Files For File Transfer dialog (Other

tab), the program prompts you to enter (or verify) its device mapping information, in the Enter

Device Mapping Information dialog.

Use this dialog to define the Device:Port:System (D:P:S) address assignment for a target device.

Editing Device Mapping Information

Select a file in the Transfer List (Send or Receive tab).

Click

Edit

to open the Edit menu, and select

Device Mapping

. This opens the Enter DPS

dialog.

Enter the Device:Port:System (D:P:S) information for the selected file.

Click

to save the D:P:S assignment and close the dialog.

Step 4: Transferring the Files

Sending Files To System Devices

Once you have:

Added the desired file(s) to the File To Send Queue,

Configured the communication settings for the files in the list, and

Specified the device-file mapping information for the files in the list,

...you are ready to begin transferring the file(s) to devices in the system:

Click the

Send

command button. This initiates the transfer of every file listed in the Transfer (Send)

List, in the order in which they are listed (top to bottom).

The progress and status of each file transfer is indicated in the File Transfer Status tab of the Output

Window.

Receiving Files From System Devices

Once you have:

Added the desired file(s) to the File To Receive Queue,

Configured the communication settings for the files in the list, and

Specified the device-file mapping information for the files in the list,

...you are ready to begin receiving the file(s) from devices in the system:

Click the

Receive

command button. This initiates the transfer of every file listed in the Files To

Send List, in the order in which they are listed.

The progress and status of each file transfer is indicated in the Transfer Status Window.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands