manualshive.com logo in svg

AMX NETLINX STUDIO V2.4, Instruction Manual

AMX NETLINX STUDIO V2.4 is a cutting-edge software designed for controlling and managing integrated systems. Unlock the full potential of your device with this powerful tool. Find the comprehensive Instruction Manual for free download from our website, enabling you to effortlessly navigate and optimize your user experience.

Share
Download
background image

Working With Online Devices

118

NetLinx Studio (v2.4 or higher)

results of this status check are indicated in the Status tab of the Output Window (see 

FIG. 24 on page 120). 

 

Devices

: The elements below the Master Controller in the device tree represent devices in 

the system. These elements indicate the device number, device name and the device 

firmware version currently loaded (FIG. 23): 

 

Click the plus sign to expand the view to show sub-devices and ports on the Master.

 

Sub-devices

 are indicated with red icons, and give a description and firmware 

version info (in parenthesis) for each.

 

Below the sub-devices is a listing of 

Ports

 on the Master. To check the status on any 

port, right-click on a port and select 

Check Port Status

 from the context menu. The 

results of this status check are indicated in the Status tab of the Output Window 

(FIG. 24).

Device States

There are several possible "states" for devices listed in the online device tree: 

FIG. 23  

Online Device Tree - Device element

• Unbound Device:

An Unbound (or "Orphan") device is one that has not been bound to a 
NetLinx Master. It may or may not have been assigned a Device Number. A 
device will live in this state until it is explicitly bound to a master.

• Searching:

A device is "Searching" if it has been bound to a NetLinx Master in the 
past, but is not currently communicating with the Master. 

After 10 minutes with no communication with the NetLinx Master, a 
"Searching" device is moved into the "Lost" state.

• Lost:

A device is "Lost" if it has been bound to a NetLinx Master in the past, but it 
has not communicated with the Master for over 10 minutes.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Reviews:

No comments

Related manuals for NETLINX STUDIO V2.4

NEC Versa LX Important Information preview
Versa LX
Brand: NEC Pages: 4
Native Instruments Reaktor Spark Manual preview
Reaktor Spark
Brand: Native Instruments Pages: 38
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Brand: Blackberry Pages: 18
Arturia Minimoog V Quick Start Manual preview
Minimoog V
Brand: Arturia Pages: 10
Cpanel Cpanel User Manual preview
Cpanel
Brand: Cpanel Pages: 221
SimpleTech FV-U35/250 User Manual preview
FV-U35/250
Brand: SimpleTech Pages: 108
I.R.I.S. IPS9-FL Datasheet preview
IPS9-FL
Brand: I.R.I.S. Pages: 2
FieldServer FS-8700-64 Driver Manual preview
FS-8700-64
Brand: FieldServer Pages: 22
MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual preview
COLDFUSION MX-CLUSTERCATS
Brand: MACROMEDIA Pages: 156
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - INTERACTIVE GRAPHING SUPPORT FOR ... Manual preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - INTERACTIVE GRAPHING SUPPORT FOR ...
Brand: IBM Pages: 29
Partec PARASTATION5 V5 Administrator'S Manual preview
PARASTATION5 V5
Brand: Partec Pages: 98
NEC SpectraView Reference 241 User Manual preview
SpectraView Reference 241
Brand: NEC Pages: 68
Patton electronics SmartWare R.3.20 Software Configuration Manual preview
SmartWare R.3.20
Brand: Patton electronics Pages: 573
Canon FS 2710 User Manual preview
FS 2710
Brand: Canon Pages: 80
Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual preview
Coral SeaBeam
Brand: Tadiran Telecom Pages: 68
Lenovo ThinkCentre M80 Hardware Maintenance Manual preview
ThinkCentre M80
Brand: Lenovo Pages: 282
PowerDsine PowerView Pro User Manual preview
PowerView Pro
Brand: PowerDsine Pages: 95
Oki Okicolor8 Instruction Manual preview
Okicolor8
Brand: Oki Pages: 39

Brands by name

Popular brands

Load more brands