AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 165

Page: 165 / 200

Communications and File Transfers

153

NetLinx Studio (v2.4 or higher)

Adding Files To The Files To Send Queue

There are several possible approaches to adding files to the Files To Send List (Send tab).

Add some or all of the files contained in a Workspace file or a Workspace-To-Go file.

Add individual systems (see Supported File Types list).

Notes:

The file types that are available for selection depend on the selected Platform (Axcess or

NetLinx), Send/Receive selection and Communication settings.

All files must mapped to devices before they can be selected for transfer. You can edit the

file's mapping information via the Edit menu (Device Mapping option), but without any

mapping information associated with the file, it cannot be selected.

Source Code files cannot be sent until they have been successfully compiled.

While Touch Panel UI files are sent to the panels themselves, KPD files are sent to the

master and not directly to the keypad. Before sending a KPD (KPDesign) file to the target

keypad(s), be sure that you have successfully compiled the Source Code file that contains

the keypad module, and sent it to the Master.

Adding All Files Contained In An APW Or AXW File

In the Send tab:

Select

File > Open Workspace/AXW/FTL File

or click the Load Workspace command

button to open the Open File dialog.

Select either

NetLinx Studio Files (*.apw)

Export-To-Go Files (*axw)

from the

File of Type

drop-down menu (depending on which type of file contains the system files that you want to

transfer).

This dialog contains two tabs:

Existing

and

Recent

Use the Existing tab to locate and select the desired file, with the ability to navigate

through all available local and network drives.

The Recent tab contains a listing of the most recently used files (of all types).

Locate and select the Workspace file that you want to add, and click

Open

. This opens the

Quick Load dialog.

In the

Selection Options

section, select

Entire Workspace

Click

Select All

to add every file type in the Workspace, and enable the

Remove Duplicates

when Loading

option.

Click

to close the Quick Load dialog and add the files to the

File To Send

queue.

Adding Files From A Specific Project/system

In the Send tab:

Select

File > Load Workspace/AXW/FTL File

or click the Load Workspace command button

to open the Open File dialog.

Set the

File of Type

drop-down to

NetLinx Studio Files (*.apw)

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands