AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 21

Page: 21 / 200

The NetLinx Studio v2.4 Work Area

NetLinx Studio (v2.4 or higher)

The fourth level contains all of the actual files that make up the System (.AXS, .AXI,

.TPD, .TKO, .TP4 .IRL/.IRV, and *.*).

The fifth and final level indicates the file mapping information for each file, as applicable.

Click on the "+" folder flags to expand the folders to expose any subfolders; click the "-" folder

flags to collapse the folders.

The hierarchical file structure of the Workspace tab is described below:

Workspace Folder

You can have one Workspace open at a time. A Workspace contains at least one Project,

and each Project contains at least one System.

Right-mouse click anywhere within the workspace tab to open the Workspace context

menu.

Project Folders

Right-mouse click on any Project folder to open the Project Folder context menu.

Expand any Project folder to display the System folder(s) contained in that Project.

System Folders

Each System has it's own platform (Axcess or NetLinx) setting along with the

communication information (i.e. IP address or COM port setting with the appropriate

baud rate, etc.).

Right-mouse click on any System folder to open the System Folder context menu.

The 'Module' folder only appears if NetLinx is designated as the system platform (via
the Communication Settings dialog).

FIG. 5

Workspace Window - Workspace Tab

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands