AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 174

Page: 174 / 200

Communications and File Transfers

162

NetLinx Studio (v2.4 or higher)

Click the

Communication Settings

button to access the Communication Settings dialog.

Select

Virtual NetLinx Master

as the Transport Connection Option.

Click

to close this dialog.

Click

to close the Master Communication Settings dialog.

Configuring NetLinx Studio for Virtual NetLinx Master Transfers

Select

Settings > Master Communications

to open the Master Communication Settings

dialog.

Make a selection in the

Available Systems

list to specify the scope of this communication

setting:

Select

<No Active System-Default Settings>

to set Virtual NetLinx Master as the

default communication setting.

To set Virtual NetLinx Master as the communication setting for a particular system in the

active project, select one of the Systems listed under NetLinx Project.

Click

Communication Settings

to access the Communication Settings dialog.

Verify that

NetLinx Master

is selected as the

Platform Selection

, and select

Virtual NetLinx

Master

as the

Transport Connection Option

Click

Edit Settings

to access the Virtual NetLinx Master Settings dialog.

The

System Number

field is set to

by default. Assuming that the actual NetLinx Master is

set to

(via the System Properties dialog - System ID field), this default setting will work.

However, if you have designated any other number as the System ID, be sure to set this System

Number to a different number than the System ID, to avoid a conflict with the actual NetLinx

Master (range = 1-65535).

Transferring Files Using A Virtual Netlinx Master Usb Connection

To use Virtual NetLinx Master to transfer TPDesign4 panel (.TP4) files, NetLinx Firmware (.KIT)

files or IR files directly to a MVP-7500, MVP-8400 or NXD/T-CV7 panel via USB:

Select

Tools > File Transfer

to open the File Transfer dialog (open to the Send tab).

Click the

Add

button to open the Select Files for File Transfer dialog.

Click the

Other

tab, and select the type of file you want to transfer (only IRL/IRV, TP4 or IRN

files can be transferred via a Virtual NetLinx Master connection).

Click the

Add

button. This invokes the Open dialog, where you can locate and select the file

you want to transfer.

As indicated in the Virtual NetLinx Master dialog, changes made to the system
number field will not take effect until all communications are stopped and restarted.

Verify that Virtual NetLinx Master is selected as the Transport Connection Option in
the Communication Settings dialog.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands