AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 129

Page: 129 / 200

Working With Online Devices

117

NetLinx Studio (v2.4 or higher)

The online devices are organized according to the System they belong to.

Double-click any System folder to display a list of System devices (and their firmware

version) that are currently online.

Double-click any online device in the list to display the ports and sub-devices associated

with the device.

Click the

Display

command button (or right-click anywhere within the Online Tree tab)

to access the Online Tree Context Menu.

Device Tree Elements

The main elements of the online device tree are described below:

System

: The highest-level element in the device tree is the System element. This element

indicates the System Number, followed by the Master Controller’s IP address and MAC

address (FIG. 21):

Master Controller

: The next element down from the System is the Master Controller

element. This element indicates the Master Controller’s device number, device name and

indicates the Master firmware version currently loaded (FIG. 22):

Click the plus sign to expand the view to show sub-devices and ports on the Master.

Sub-devices

are indicated with red icons, and give a description and firmware

version info (in parenthesis) for each.

Below the sub-devices is a listing of

Ports

on the Master. To check the status on any

port, right-click on a port and select

Check Port Status

from the context menu. The

Sub-devices are hardware components contained within a parent device, which may
require their own firmware. For example, and NXI Master Controller contains three
components, each of which require firmware.

FIG. 21

Online Device Tree - System element

FIG. 22

Online Device Tree - Master Controller element

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands