AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 110

Page: 110 / 200

Programming

NetLinx Studio (v2.4 or higher)

To execute the next line of code, right-click and choose Step Into. You'll see the execution

pointer advance one line.

If you no longer need to single step, right-click and choose Run.

Clearing Breakpoints

You clear an individual breakpoint, or clear all breakpoints in a file:

To clear an individual breakpoint

- Place the cursor on a line of code containing a set

breakpoint, and choose

Debug > Toggle Breakpoint

, or use the Toggle Breakpoint

toolbar button to unset the breakpoint on that line.

To clear all breakpoints in a file

- Choose

Debug > Clear All Breakpoints

, or use the

Clear All Breakpoints toolbar button.

Editing Breakpoints

Select

Debug > Edit Breakpoints

(or click the toolbar button) to access the Breakpoints dialog.

Use the options in this dialog to toggle any breakpoints set in the active (NetLinx) Source Code file.

PUSH Messages

Select

Diagnostics > Enable Push Message Status Bar Displa

y (or click the toolbar button) to

display Push message status (

Enabled

Disabled

Insert Push Message Dialog

Select

Insert Push Message

from the Edit menu to open the Insert Push Message dialog.

This dialog displays a list of recent Push messages that were sent to the Master.

Click to select a Push from the list, and click

to insert the code for that Push message at the

cursor's position in the active code file.

If you are not currently debugging, you won't see execution break until you start
debugging (Debug > Start Debugging).

FIG. 19

PUSH Messages

By default, Push Messages are disabled, as indicated in the Status Bar.

Push Messages are enabled via the Diagnostics menu or the Diagnostics toolbar.

Once the Push Message Status Bar display is enabled,
you can send Push messages to the Master, via the Emulate a Device dialog.
The Push Message Status Bar display then shows the D:P:S and
Channel information for the most recently received Push

Left- click within the Push Message Status Bar display
to view a list of recently received Push messages:

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands