AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 35

Page: 35 / 200

Using NetLinx Studio

NetLinx Studio (v2.4 or higher)

Click

Source Code File Description

to enter an optional description (up to 2,000

characters) in the Source Code File Description dialog, and click

to return to the

Master Source Code File Name dialog.

Click

Next

to proceed to the New File Location dialog.

Specify the target location for the new file in the text field (click the Browse button to

locate and select a target directory via the Browse For Folder dialog).

Click

Next

to complete the Wizard.

Add the Master Source Code File Later

- This option allows you to exit the Workspace

Wizard at this point, and manually specify the System's Master Source Code File later.

17.

In the Wizard Completed dialog, click

Finish

to exit the Wizard.

The new Workspace (with your new Project containing the new System) is represented in the

Workspace tab of the Workspace Window.

Building the Workspace

One advantage to the Workspace concept employed by NetLinx Studio (v2.0 or later) is that you

can choose to build (compile) the entire Workspace. That is, every Source Code, Include, and

Module file contained within the open Workspace can be compiled with a single command: Build

Workspace.

There are several ways to access the Build Workspace command - via the Build menu, the

Workspace context menu (in the Workspace tab of the Workspace Window), or via the toolbar

button.

To compile the open Workspace:

Select

Build > Build Workspace

(or click the toolbar button).

Any errors detected by the program before the build operation starts are listed in the Pre-Build

Errors dialog. This dialog gives you the option of ignoring the errors and continuing with the

build.

The status and results of the build are displayed in the Status tab of the Output Display

Window.

The Netlinx Studio Code Wizard

Select

Tools > Code Wizard

to launch the NetLinx Studio Code Wizard. The Code Wizard

consists of a series of dialogs that help you quickly generate various types of Axcess and NetLinx

code segments. The wizard can help construct the following type of code segments:

Button Events

Channel Events

Level Events

Data Events

Send Commands

IR Constants

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands