AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 107

Page: 107 / 200

Programming

NetLinx Studio (v2.4 or higher)

To enter debug mode:

Open and compile a Source Code file (that contains at least one variable), if you have not

already done so. The file must be successfully compiled before you can enter debug mode.

Choose

Build > Debug

(or click the toolbar button) to open the Watch window. If this option is

disabled, make sure your Master Communications Port settings are set to connect to your

Master Controller.

Right-click inside the Watch window to open the Watch Window context menu.

Click

Add

to insert a new variable in the Watch window. A box appears in the window, with a

cursor blinking in the Name column.

Type the syntax of the variable exactly as it is defined in the code and press the Enter key. The

value of the specified variable appears next to the variable (in the Value column).

You can select different view formats for the Value by right-clicking on the line containing the

variable/value, and clicking on Display in the Watch window context menu. This opens the

Display sub-menu, containing the following view options:

To exit Debug mode, close the Watch window.

Using Single-step Mode

In Single-step mode, program execution is suspended between each pass through mainline,

allowing you to test programs one line at a time. Single-step mode works differently in NetLinx

than it does in Axcess:

In NetLinx systems it executes a single instruction in the source file

In Axcess systems it executes a single line of code in the Mainline

To use Single-step mode:

Right-click on a watched variable and choose

Debug > Single Step

(or click the toolbar

button) to put the Master into single-step mode.

With the watched variable selected, select

Debug > Single Step

(or click the toolbar button).

This command executes mainline one time and breaks.

ASCII Display

displays the value of the watched variable in ASCII format.

Decimal Display

displays the value of the watched variable in decimal format.

Hexadecimal Display

displays the value of the watched variable in hexadecimal format.

Octal Display

displays the value of the watched variable in octal format.

Binary Display

displays the value of the watched variable in binary format.

In NetLinx, you can use breakpoints with single-step mode. When the breakpoint is
encountered (and the program is suspended), you can single-step without a watched
variable reference.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands