AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 156

Page: 156 / 200

Communications and File Transfers

144

NetLinx Studio (v2.4 or higher)

Setting the Default Control Platform

You can set the default control platform and communication settings via the Configuration settings

in the Master Communication Settings dialog:

Select

Settings > Master Communication Settings

to open the Master Communication

Settings dialog.

Select

<No Active System-Default Settings>

in the Available System(s) list. With this

selection, you are setting the default platform and communication settings for all new Projects/

Systems and System files.

Click the

Configure

button to access the Communication Settings dialog.

Select the

Platform

(

NetLinx

Axcess

) to be used as the default.

Click

to save your changes and close the Communication Settings dialog.

Click

to close the Master Communication Settings dialog.

Changing The System Platform (Axcess / Netlinx)

You can change the designated Platform (Axcess or NetLinx) for a System via the Platform

Selection options in the Communication Settings dialog:

Select

Settings > Master Communication Settings

to open the Master Communication

Settings dialog. The Available System(s) list in this dialog represents all Systems contained

within the open Workspace (and their parent Projects). The currently active System is

highlighted in this list

Click to select a System from the Available System(s) list.

Click the

Communication Settings

button to access the Communication Settings dialog.

Select the default platform (

NetLinx

Axcess

Note that if you select NetLinx, a Module System file folder is included in the Workspace tab of the

Workspace Window.

Connecting To A Netlinx Master

To connect to a NetLinx master, use the options in the Master Communication Settings and

Communication Settings dialogs to specify the TCP/IP address, serial port or modem settings,

depending on the transport connection type specified. These instructions in these topics assume that

the physical link between the PC running NetLinx Studio and the NetLinx master is established.

Configuring Virtual Netlinx Master Communication Settings (Netlinx Only)

Click the

Edit

command button, and select

Communication Settings

to open the

Communication Settings dialog.

Select

NetLinx Master

as the Platform Selection.

Select

Virtual NetLinx Master

as the Transport Connection Option.

Click

Edit Settings

to access the Virtual NetLinx Master Settings dialog, which displays the

System number (and IP address) of the Virtual NetLinx Master (

default = 1

Assuming that the actual NetLinx Master is set to

(via the System Properties dialog - System

ID field), this default setting will work. However, if you have designated any other number as

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands