AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 176

Page: 176 / 200

Communications and File Transfers

164

NetLinx Studio (v2.4 or higher)

After several seconds, the panel should appear in the online device tree, listed as Virtual

NetLinx Master. Once you can see the device online, you may transfer panel files directly to

and from the G4 device.

Configuring Netlinx Studio For Virtual Netlinx Master Tcp/ip Transfers

Select

Settings > Master Communication Settings

to open the Master Communication

Settings dialog.

Select the System that you want to set communication settings for (from the Available

System(s) list.

Click the

Communication Settings

button to open the Communication Settings dialog.

Select

[Virtual NetLinx Master]

as the

Transport Connection Option

Click the

Edit Settings

button to access the Virtual NetLinx Master Settings dialog, which

displays the System number of the Virtual NetLinx Master (

default = 1

Assuming that the actual NetLinx Master is set to 0 (via the System Properties dialog - System

ID field), this default setting will work. However, if you have designated any other number as

the System ID, be sure to set this System Number to a different number than the System ID, to

avoid a conflict with the actual NetLinx Master (

range = 1-65535

Click

to close the Virtual NetLinx Master Settings dialog.

Click

to close the Communication Settings dialog.

Transferring Files Using A Virtual Netlinx Master Tcp/ip Connection

To use Virtual NetLinx Master to transfer TPDesign4 panel (.TP4) files, NetLinx Firmware (.KIT)

files or IR files directly to a MVP-7500, MVP-8400 or NXD/T-CV7 panel via TCP/IP:

Select

Tools > File Transfer

to open the File Transfer dialog (open to the Send tab).

Click the

Add

button to open the Select Files for File Transfer dialog.

Click the

Other

tab, and select the type of file you want to transfer (only IRL/IRV, TP4 or IRN

files can be transferred via a Virtual NetLinx Master connection).

Click the

Add

button. This invokes the Open dialog, where you can locate and select the file

you want to transfer.

Select the desired file and click

to close this dialog and invoke the Enter Device Mapping

Information dialog.

Review the mapping information, and click

to return to the Select Files for File Transfer

dialog.

Click

to return to the File Transfer dialog, where the new file should appear in the Files to

Send list.

As indicated in the Virtual NetLinx Master dialog, changes made to the system
number field will not take effect until all communications are stopped and restarted.

Verify that Virtual NetLinx Master is selected as the Transport Connection Option in
the Communication Settings dialog.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands