AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 148

Page: 148 / 200

Working With Online Devices

136

NetLinx Studio (v2.4 or higher)

Changing the IP Address On a Netlinx Master (Specify IP Address)

Select

Diagnostics > Network Addresses

(or click the toolbar button) to access the Network

Addresses dialog.

Enter the specified master's System number in the

System

text box at the top of the dialog. The

range is 0-65535.

Click the

Get IP Information

button to populate the IP Address fields with the current

Host

Name

IP Address

Subnet

Mask

and

Gateway

assignments.

Click the

Specify IP Address

radio button, and enter the new

IP Address

Subnet Mask

and

Gateway

assignments in the text boxes, as necessary.

Click the

Set IP Information

button to set the new IP Address assignment. A message will be

displayed indicating that the Master has accepted the new settings.

Click the

Reboot Master...

button to reboot the Master and accept the new changes.

Allow 20-30 seconds for the Master to reboot.

Setting NetLinx Time and Date

Select

Tools > Set Master Controller's Date/Time

to open the Set Master Controller's Date/Time

dialog. Use the options in this dialog to set the time and date for a specified NetLinx Master.

In the

Master Controller ID

text box, enter/edit the target System number (if necessary).

To retrieve the current Time/Date settings for the specified target Master, click

Get Time/Date

The Master's current Time/Date settings are displayed in the (read-only) text field.

To change the target Master's date setting, click the down arrow next to the

Date

field to open

the calendar window. To change the system's date, click to select the desired day. Use the

forward and back arrow buttons to change the month. When you select a new date, the calendar

closes and the new date is represented in the Date field.

To set the system to today's date, click

Today

at the bottom of the calendar.

To change the target Master's time setting, select a field within the time display (

hours

minutes

seconds

, or

AM/PM

) and click the up and down arrows to adjust the selected field.

Alternatively, you can highlight the field in the Time display that you want to adjust and

type the desired number in its place.

If no field is selected within the time display, the up/down arrows affect the hours setting.

To set the specified Time/Date settings for the target system click

Set Time/Date

If the target Master has security applied, NetLinx Studio will prompt you for a User
Name and Password in order to change these settings.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands