AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 161

Page: 161 / 200

Communications and File Transfers

149

NetLinx Studio (v2.4 or higher)

transport connection type specified. These instructions in these topics assume that the physical link

between the PC running NetLinx Studio and the NetLinx master is established.

Select

Settings > Master Communication Settings

to open the Master Communication

Settings dialog.

Click

Communication Settings

to access the Communication Settings dialog.

Select

Axcess Master

as the Platform Selection.

Select

Modem

as the Transport Connection Option.

Click

Edit Settings

to open the Modem Settings dialog.

Select a COM port and specify the communication settings for modem communications. The

default settings are:

Click

to return to the Communication Settings dialog.

Click

to return to the Master Communication Settings dialog.

Click

to close the Master Communications dialog.

10.

In the online tree (displayed in the Online Tree tab of the Workspace window), click

Display

open the Online Tree sub-menu, and select

Refresh Network

to refresh the online tree display.

11.

Double-click the System icon to expand the tree to show the Axcess master.

File Transfer Operations

NetLinx Studio supports asynchronous communications (send and receive to and from the bus on

all available communications ports simultaneously). You can send and receive both Axcess and

NetLinx Source Code files to and from the Master Controller or bus device.

Axcess or NetLinx Source Code files (.AXS) can be sent to the Master Controller, or

other control devices on the bus. Source code files must be successfully compiled before

they can be sent.

Touch Panel UI files created in TPDesign3 (.TPD) are sent directly to wired Touch Panels

on the bus via an AXlink/serial connection where the Device ID = 0.

Touch Panel UI files created in TPDesign4 (.TP4) are sent to the Master, either serially or

over TCP/IP. G4 panels are connected to the Masters via TCP/IP and cannot be sent over

AXlink. You can choose to include buttons and pages only, or include fonts, bitmaps and/

or icons in the transfer.

KeyPad UI files (.KPD) are sent to a NetLinx Master.

Comm Port

COM1

Baud Rate

38400

Data Bits

Parity

None

Stop Bits

Flow Control

None

Phone Number

Enter the telephone number of the master.

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands