AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 133

Page: 133 / 200

Working With Online Devices

121

NetLinx Studio (v2.4 or higher)

By default, the selected device is displayed in the

Device to Bind/Unbind

window at the top of

the dialog. If there is more than one Unbound device in the system, click the down arrow to

select which device you want to bind.

Check the checkbox next to the Master that you want to bind the device to. If there is more than

one Master in the system, check the specific Master that you want to bind the device to.

Select

Refresh System

(in the Device Tree context menu). The device should now appear in

the device list (indicated with a green device icon).

To Unbind a Bound Device:

Right-click on the device that you want to unbind in the Device Tree.

Select

Unbind Device

to open the Bind/Unbind Device dialog (FIG. 25).

De-select the checkbox next to the Master that the device is currently bound to.

Select

Refresh System

(in the Device Tree context menu). The device should now appear in

the Unbound Devices folder (indicated with a green device icon).

NetLinx Diagnostics - NetLinx Device Notification

The NetLinx Device Notifications functionality in NetLinx Studio v2 allows you to receive several

types of auto-notification messages from one or more specified NetLinx devices. Use the NetLinx

Device Notifications Options dialog (

Diagnostics > NetLinx Device Notification Options

) to set

auto-notification preferences for one or more NetLinx devices.

Select

Enable NetLinx Device Notifications

from the Diagnostics menu (or use the

toolbar button) to enable the specified NetLinx notifications. The resulting notification

messages are displayed in the Notifications tab of the Output Display window. The

Notifications tab contains 13 columns. Each column represents a notification type (which

are enabled/disabled in the NetLinx Notification Properties dialog). If a notification type

is enabled, the word ON is displayed in the appropriate column. Initially, the only entry

in the notifications list is All Devices, and the only notification enabled is Input.

Select the

Enable Asynchronous Notifications

option (in the NetLinx Device

Notifications Options dialog) to enable asynchronous notifications.

Adding A Device To The Device Notification List

In order to edit, add or remove devices from the list you must be connected to a NetLinx master

controller.

Select

Diagnostics > NetLinx Device Notification Options

to open the NetLinx Device

Notifications Options dialog.

Click

Add

to open the NetLinx Notification Properties (Add) dialog.

Specify the

Device

Port

and

System

numbers for the NetLinx device that you want to set

notification options for.

Check each notification type that you want to enable for that device.

The D:P:S combination of 0:0:0 is the default setting and will show up as "All
Devices".

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands