AMX NETLINX STUDIO V2.4 Instruction Manual Download Page 147

Page: 147 / 200

Working With Online Devices

135

NetLinx Studio (v2.4 or higher)

Click

Get DNS Information

to populate the DNS Address fields with the current

Domain

Suffix

DNS IP Address #1

DNS IP Address #2

and

DNS IP Address #3

assignments (as

applicable).

Edit the DNS Address assignments and/or add new DNS address information as needed.

Click

Set DNS Information

to set the new DNS address assignments.

Setting the IP Address For a NetLinx Master

Select

Diagnostics > Network Addresses

(or click the toolbar button) to access the Network

Addresses dialog.

At the top of the dialog, enter the specified device's

System

and

Device

numbers in the text

boxes (range = 0-65535).

Click

Get IP Information

to populate the IP Address fields with the current

Host Name

Address

Subnet Mask

and

Gateway

assignments.

Click the

Specify IP Address

radio button, and enter the new

IP Address

Subnet Mask

and

Gateway

assignments in the text boxes, as necessary.

Click

Set IP Information

to set the new IP Address assignment.

Click

Reboot Master...

to reboot the master and accept the new changes.

Allow 20-30 seconds for the master to reboot.

Changing the IP Address On a Netlinx Master (Use DHCP)

Use the options in the Network Addresses dialog to change the IP Address for a specified NetLinx

device (using DHCP):

Select

Diagnostics > Network Addresses

(or click the toolbar button) to access the Network

Addresses dialog.

At the top of the dialog, enter the specified device's

System

and

Device

numbers in the text

boxes. The range is 0-65535.

Click the

Get IP Information

button to populate the IP Address fields with the current

Host

Name

and

Gateway

assignments.

Click the

Use DHCP

radio button, and enter the new

Host Name

in the text box, if necessary.

Click the

Set IP Information

button to set the new Host Name assignment. A message will be

displayed indicating that the Master has accepted the new settings.

Click the

Reboot Master...

button to reboot the Master and accept the new changes.

Allow 20-30 seconds for the Master to reboot.

NXI masters are always set to Device = 0.

If you change the IP Address of a Master (if connected via IP), you must also change
the communication settings to match the new IP Address (in the Communication
Setting dialog).

Summary of Contents for NETLINX STUDIO V2.4









































































































































































































Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands

AMX NETLINX STUDIO V2.4, Instruction Manual

Search results

Summary of Contents for NETLINX STUDIO V2.4

Reviews:

Related manuals for NETLINX STUDIO V2.4

Brands by name

Popular brands