Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 147 / 162

Asterion DC Multioutput Series
Programming Manual
13-130
M330517-01 Rev C
CAL<n>:OUTP:CURR:DAC 19000
(19000 is the present DAC value for
point2)
10.
Let the output settle and measure the output current with the current shunt and
the high precision voltmeter; this is value 2.
11.
Enter the actual output current of the second calibration point:
CAL<n>:OUTP:CURR:FIVEPOINT 2 <value 2>
12.
Program the output of the third calibration point by sending the following
command string from the computer:
CAL<n>:OUTP:CURR:DAC 32000
(32000 is the present DAC value for
point3)
13.
Let the output settle and measure the output current with the current shunt and
the high precision voltmeter; this is value 3.
14.
Enter the actual output current of the third calibration point:
CAL<n>:OUTP:CURR:FIVEPOINT 3 <value 3>
Program the output of the fourth calibration point by sending the following
command string from the computer:
CAL<n>:OUTP:CURR:DAC 45000
(45000 is the present DAC value for
point4)
15.
Let the output settle and measure the output current with the current shunt and
the high precision voltmeter; this is value 4.
16.
Enter the actual output current of the fourth calibration point:
CAL<n>:OUTP:CURR:FIVEPOINT 4 <value 4>
17. Program the output of the fifth calibration point by sending the following
command string from the computer:
CAL<n>:OUTP:CURR:DAC 62250
(62250 is the present DAC value for
point5)
18.
Let the output settle and measure the output current with the current shunt and
the high precision voltmeter; this is value 5.
19.
Enter the actual output current of the fifth calibration point:
CAL<n>:OUTP:CURR:FIVEPOINT 5 <value 5>
20. To review entered data for five
–point current calibration, issue the following
query: