Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 87 / 162

Asterion DC Multioutput Series
Programming Manual
10-70
M330517-01 Rev C
:POWer <NRf>
:POWer?
[:LEVel] <NRf>
[:LEVel?]
[:IMMediate] <NRf>
[:IMMediate?]
[:AMPLitude] <NRf>
[:AMPLItude?]
:MAX?
:LIMit <NRf>
:LIMit?
SOURce<n>
:ANALOG
:PROGram
:SOURce <string>
:REMote
:OUTPut <boolean>
10.5.2
SOURCE SCPI Command Reference
The letter “C” in the “SCPI” column means that the command syntax is SCPI compliant;
an “N” in the “SCPI” column means that the command syntax is not part of the SCPI
definition.
The Data format “
<n>
“
represents the Channel Number (1, 2 and 3).
Command Description SCPI
SOURce<n>:CURRent <NRf>
Sets the output current in amps (default) or in
milliamps.
C
SOURce<n>:CURRent?
Returns the output current in amps or in
milliamps
C
SOURce<n>:CURRent[:LEVel] <NRf>
Sets the output current in amps (default) or in
milliamps.
C
SOURce<n>:CURRent[:LEVel]?
Returns the output current in amps or in
milliamps.
C
SOURce<n>:CURRent[:LEVel][:IMMediate] <NRf>
Sets the output current in amps (default) or in
milliamps.
C
SOURce<n>:CURRent[:LEVel][:IMMediate]?
Returns the output current in amps or in
milliamps
C
SOURce<n>:CURRent[:LEVel][:IMMediate]
[:AMPLitude] <NRf>
Sets the output current in amps (default) or in
milliamps.
C
SOURce<n>:CURRent[:LEVel][:IMMediate]
[:AMPLitude]?
Returns the output current in amps or in
milliamps
C
SOURce<n>:CURRent:MODE?
Returns the mode of operation of the power
supply.
0 - Constant voltage operation,
1 - Constant current operation and
2 - Constant power operation
N
SOURce<n>:CURRent:LIMit<NRf>
Sets an upper soft limit on the programmed
output current for the supply. The soft limit
prevents the supply from being inadvertently
programmed above the soft limit, thus providing
a method for protecting the load against
damaging currents.
C
SOURce<n>:CURRent:LIMit?
Returns the upper soft limit on the programmed
output current for the supply.
C