Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 35 / 162

Asterion DC Multioutput Series
Programming Manual
5-18
M330517-01 Rev C
USB Setup Procedure
5.2.1
Port Number Identification
Port Number of the Asterion DC Multioutput Series power supply can be identified in the
device manager by following the steps below:
1. Navigate to device manager in the windows system.
2. Go to Ports and check for the new COM port available in the list. (Refer to Figure
5-2)
Note: If Multiple COM ports are shown, disconnect all the COM ports and connect only
the Asterion DC Multioutput power supply and check for the new COM port.
Figure 5-2: Port identification