Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 104 / 162

Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C 10-87
CALibrate<n>
:UNLock <string>
:STORe
:LOCK
10.11.2
CALIBRATION SCPI Command Reference
The letter “C” in the “SCPI” column means that the command syntax is SCPI compliant;
an “N” in the “SCPI” column means that the command syntax is not part of the SCPI
definition.
Command Description SCPI
CALibrate<n>:INITial:CURRent <NRf>
Sets the power-on default value of
current.
N
CALibrate<n>:INITial:CURRent?
Returns the default value of power-
on current.
N
CALibrate<n>:INITial:CURRent:LIMit
<NRf>
Sets the power-on default value of
current limit.
N
CALibrate<n>:INITial:CURRent:LIMit?
Returns the default value of power-
on current limit.
N
CALibrate<n>:INITial:CURRent:PROGram
<string>
Sets the power-on default setting for
output current programming. Valid
arguments - INT, EXT or ADD
N
CALibrate<n>:INITial:CURRent:PROGram
:FSC <NRf>
Sets the power-on default voltage
value for full scale current from
external analog programming.
N
CALibrate<n>:INITial:CURRent:PROGram
:FSC?
Returns the power-on default full
scale voltage value.
N
CALibrate<n>:INITial:CURRent:PROGram
:FSCR <NRf>
Sets the power-on default resistance
value for full scale current from
external analog programming.
N
CALibrate<n>:INITial:CURRent:PROGram
:FSCR?
Returns the power-on default full
scale resistance value.
N
CALibrate<n>:INITial:CURRent:PROGram
?
Returns the default setting of power-
on output current programming.
N
CALibrate<n>:INITial:CURRent:MONitor
Initializes the current monitor
(IMON) signal calibration
N
CALibrate<n>INITial:CURRent:MONitor:
FSC <NRf>
Sets the power-on default voltage on
IMON signal for full scale output
current.
N
CALibrate<n>
:
INITial:CURRent:MONitor
:FSC?
Returns the power-on default full
scale voltage value on IMON signal.
N
CALibrate<n>:INITial:VOLTage <NRf>
Sets the power-on default voltage.
N
CALibrate<n>:INITial:VOLTage?
Returns the default value of power-
on voltage
N
CALibrate<n>:INITial:VOLTage
[:AMPLitude] <NRf>
Sets the power-on default voltage.
N
CALibrate<n>:INITial:VOLTage
[:AMPLitude]?
Returns the power-on default
voltage.
N