Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C
4-13
2. Connect power to the unit and turn on the unit.
3. The baud rate is selectable through the front panel, see Figure 4-4. Change the
baud rate for RS232 to 9600.
To navigate to RS232, configure screen, go to Home
→
Control Interface
→
RS232
→
RS232 Configure.
4. Upon tapping the text box, following baud rates selection screen will appear.
Figure 4-4: RS232 Screen (Configure)
5. Use one of the available programs for serial communication, such as Tera Term.
6. If you choose to use Tera Term:
•
Select serial option in the Tera term window and select the port as COM1 and
press OK. (Refer to Figure 4-5)
Figure 4-5: Port Setting in Tera Term
Summary of Contents for Sorensen Asterion DC ASM
Page 1: ...M330517 01 Rev C Asterion DC Multioutput Series Programming Manual...
Page 6: ...Asterion DC Multioutput Series Programming Manual M330517 01 Rev C v SAFETY SYMBOLS...
Page 145: ...Asterion DC Multioutput Series Programming Manual 13 128 M330517 01 Rev C CAL n LOCK...
Page 162: ...M330461 01 Rev C 14 145...
