Asterion DC Multioutput Series
Programming Manual
10-80
M330517-01 Rev C
Command
Description
SCPI
SYSTem:PROGDELAY:ENABLE?
Returns the configured channels that are Enabled on Output ON
or OFF Delay feature.
N
SYSTem:PROGDELAY:DISABLE
Disables the configurations to turn ON or OFF the output on
Output ON or OFF Delay feature.
N
SYSTem:PROGDELAY:DELAY
<NRf>,<NRf>,<NRf>
Sets the channels delay, Argument 1 represents channel 1
delay, argument 2 represents channel 2 delay and argument 3
represents channel 3 delay. Delay should be entered for all 3
channels,
For example : Channel 1,2 are enabled,
Delay should be 0,<delay for 2 channel>,0
SCPI: SYST:PROGDELAY:DELAY 0,30,0
Reference Channel and non-selected channel should have 0
delay.
N
SYSTem:PROGDELAY:DELAY?
Returns the programed delay for the channel that were
enabled.
N
SYSTem:PROGDELAY:OUTPut:
STATe <boolean>
Sets the Output ON or OFF Delay feature to turn ON or OFF
with programed delay time.
0 = sets the Output ON or OFF Delay feature to turn OFF the
output of power supply for the Enabled channels with
programmed delay time.
1 = sets the Output ON or OFF Delay feature to turn ON the
output of power supply for the Enabled channels with
programmed delay time.
N
SYSTem:PROGDELAY:OUTPut:
STATe?
Returns the Output ON or Off delay feature
’s state.
N
SYST:NET:AUTOIP <boolean>
Sets the network Auto IP mode in the Primary configuration
without affecting the Secondary configuration.
0 = disable AutoIP; 1 = enable AutoIP
N
SYST:NET:AUTOIP?
Returns 1 if AutoIP is enabled in the Primary configuration.
Returns 0 if AutoIP is disabled in the Primary configuration.
N
SYST:NET:DESC <string>
Set the network Description, a 36 character alphanumeric string
N
SYST:NET:DESC?
Returns the network Description.
N
SYST:NET:DHCPMODE <boolean>
Sets the network DHCP Mode in the Primary configuration
without affecting the Secondary configuration.
0 = disable DHCP; 1 = enable DHCP
N
SYST:NET:DHCPMODE?
Returns 1 if DHCP Mode is enabled in the Primary
configuration.
Returns 0 if DHCP mode is disabled in the Primary
configuration.
N
SYST:NET:DNS <string>
Sets the network DNS IP address for the device. String is in the
format “NNN.NNN.NNN.NNN”
where “NNN” = 0 through 255, inclusive.
N
Summary of Contents for Sorensen Asterion DC ASM
Page 1: ...M330517 01 Rev C Asterion DC Multioutput Series Programming Manual...
Page 6: ...Asterion DC Multioutput Series Programming Manual M330517 01 Rev C v SAFETY SYMBOLS...
Page 145: ...Asterion DC Multioutput Series Programming Manual 13 128 M330517 01 Rev C CAL n LOCK...
Page 162: ...M330461 01 Rev C 14 145...
