Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 93 / 162

Asterion DC Multioutput Series
Programming Manual
10-76
M330517-01 Rev C
Command Description SCPI
MEASure<n>:CURRent
:ANALOG?
Returns the Co-efficient of programmed output current
from external Analog current programming feature.
N
MEASure<n>:POWer?
Returns the floating point value of the measured output
power in watts.
C
MEASure<n>:VOLTage?
Returns the floating point value of the DC output
voltage in volts.
C
MEASure<n>:VOLTage:AVErage
<NR1>
Enter a value of 1 to 5 to set the number of readings to
average together when returning the voltage value
from the
MEAS<n>:VOLT?
command. This function
reduces noise in the readback readings. The value of
1 (factory default) provides the fastest response time in
the readings, but less rejection of noise.
N
MEASure<n>:VOLTage:AVErage?
Returns the number 1 to 5 to indicate the last set
number of readings to average together when taking a
voltage reading.
N
MEASure<n>:VOLTage:PROGram?
Returns the programmed output voltage from external
Analog voltage programming feature.
N
MEASure<n>:VOLTage:ANALOG?
Returns the Co-efficient of programmed output voltage
from external Analog voltage programming feature.
N
OUTPUT SCPI Command Subsystem
This section first presents a tree summary of the OUTPut commands and then provides
a tabular description.
10.7.1
OUTPUT SCPI Command Summary
OUTPut<n>
:PROTection
:DELay <NRf>
:DELay?
:FOLD <0|1|2|3>
:FOLD?
:CLE
:SENSe <boolean>
:SENSe?
:DEFault <Boolean>
:DEFault?
:STATe <boolean>
:STATe?
:TRIPped?
:REMote
:INHIBIT<0|1>
:INHIBIT?
10.7.2
OUTPUT SCPI Command Reference
The letter “C” in the “SCPI” column means that the command syntax is SCPI compliant;
an “N” in the “SCPI” column means that the command syntax is not part of the SCPI
definition and The Data format <n> represents individual channel number.