Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 89 / 162

Asterion DC Multioutput Series
Programming Manual
10-72
M330517-01 Rev C
Command Description SCPI
SOURce<n>:CURRent:PROGram:FSCR?
Returns the Full-scale Resistance, at which Full
scale Current will be programmed.
N
SOURce<n>:CURRent:MONitor:FSC <NRf>
Sets Full Scale voltage on Current monitor pin
(IMON), when power supply is producing full
scale output current.
N
SOURce<n>:CURRent:MONitor:FSC?
Returns the full scale voltage set for Current
monitor pin (IMON)
N
SOURce<n>:CURRent:PROGram:SOURce <string>
Changes the source for EXTernal analog
programming Mode. Valid arguments are VOLT
and CURR.
VOLT
– Voltage source (0-10V range)
CURR
– Resistive load on constant 1mA source
(0-10kOhm). 1mA current source is in built in
power supply.
N
SOURce<n>:CURRent:PROGram:SOURce?
Returns the setting of External analog
programming source.
N
SOURce<n>:VOLTage <NRf>
Sets the output voltage of the supply in volts
(default) or in millivolts.
C
SOURce<n>:VOLTage?
Returns the output voltage of the supply in volts
or in millivolts.
C
SOURce<n>:VOLTage[:LEVel] <NRf>
Sets the output voltage of the supply in volts
(default) or in millivolts.
C
SOURce<n>:VOLTage[:LEVel]?
Returns the output voltage of the supply in volts
or in millivolts.
C
SOURce<n>:VOLTage[:LEVel][:IMMediate] <NRf>
Sets the output voltage of the supply in volts
(default) or in millivolts.
C
SOURce<n>:VOLTage[:LEVel][:IMMediate]?
Returns the output voltage of the supply in volts
or in millivolts.
C
SOURce<n>:VOLTage[:LEVel][:IMMediate]
[:AMPLitude] <NRf>
Sets the output voltage of the supply in amps
(default) or in milliamps.
C
SOURce<n>:VOLTage[:LEVel][:IMMediate]
[:AMPLitude?]
Returns the output voltage of the supply in amps
or in milliamps.
C
SOURce<n>:VOLTage:LIMit <NRf>
Sets the upper soft limit on the programmed
output voltage. The soft limit prevents the supply
from being inadvertently programmed above the
soft limit, thus providing a method for protecting
the load against damaging voltages.
C
SOURce<n>:VOLTage:LIMit?
Returns the upper soft limit set on the
programmed output voltage.
C
SOURce<n>:VOLTage:LIMit[:AMPLitude] <NRf>
Sets the upper soft limit on the programmed
output voltage.
C
SOURce<n>:VOLTage:LIMit[:AMPLitude]?
Returns the upper soft limit on the programmed
output voltage.
C
SOURce<n>:VOLTage:PROTection <NRf>
Sets the overvoltage protection trip point in volts
(default) or in millivolts.
C
SOURce<n>:VOLTage:PROTection?
Returns the set overvoltage protection trip point
in volts (default) or in millivolts.
C
SOURce<n>:VOLTage:PROTection[:LEVel] <NRf>
Sets the overvoltage protection trip point in volts
(default) or in millivolts.
C
SOURce<n>:VOLTage:PROTection[:LEVel]?
Returns the set overvoltage protection trip point
in volts or in millivolts.
C
SOURce<n>:VOLTage:PROTection:TRIPped?
Returns 1 (TRIPPED) or 0 (UNTRIPPED) state of
the overvoltage protection circuit.
C