Amano Time Guardian Series, Installation And User Manual

Page: 265 / 414

Time Guardian Series
– Advanced Meal Module 13-15
•
Penalty: Select this box to apply the penalty. This applies when an employee is not able
to take their assigned break for the day. The employer is penalized.
•
Penalty Length: Enter the penalty window length. If an employee takes their break during
this window, the penalty is the amount of time assigned the penalty window, minus the
lunch taken at the penalty Pay Code.
•
Pay Code: Select appropriate Pay Code from the dropdown list.
•
Apply Short Penalty: Select this box to apply the short penalty.
To delete a break window, select the desired row and click on the Delete button.
12. Click on the Coffee Breaks tab. Repeat steps 10 through 12 for the Coffee Breaks.
13. Click on the Meals tab. Repeat steps 10 through 12 for the Meals.
Break Credit
Break Credit is used to apply the left over or remaining time that an employee has from a meal
or break to other meals or breaks where the employee exceeded the time allowed.
For example, the Break Credit is setup to allow break time to be credited to meals for the
Maximum Amount of 15 minutes. The break time allocated for the employee is 20 minutes and
the meal time allocated is 45 minutes. The employee takes a 10-minute break and 55-minute
meal. The 10 minutes that employee did not take for the break will be applied to the 10 minutes
the employee went over on the meal. No extra time will be deducted from the employee for
taking a longer meal than allowed. The total time taken from the employee is 65 minutes. If the
Break Credit is not used (set to None), then 75 minutes would deducted from the employee (20
minutes for breaks and 55 minutes for meal).
To configure the Break Credit:
1. Click on the Meal Templates node within the Shifts module in the Tree View.
2. Click on the button, and the Meal Templates window will appear. Click on the Break
Credit tab.