Amano Time Guardian Series Installation And User Manual Download Page 357

Page: 357 / 414

Time Guardian Series

–

Events Notification Module

20-9

5. The Administrator Account screen will appear.

Enter the following:

•

Current Password: For new installations, the default current password is admin.

•

Admim Email Address: Enter the e-mail address of the Admin or computer that the Jive

Messenger Server is installed on.

•

New Password: Enter a new password for admin account. If you do not want to change

the password for the admin user, click Skip This Step button.

•

Confirm Password: Enter the same password as above.

6. The Jive Messenger Setup Complete screen will appear. The IM Server must be restarted.

To do so, right click on the in the system tray on the lower right hand corner and click
Launch Admin.

Summary of Contents for Time Guardian Series






























































































































































































































































































































































































































Search results

Summary of Contents for Time Guardian Series

Reviews:

Related manuals for Time Guardian Series

Brands by name

Popular brands

Amano Time Guardian Series, Installation And User Manual

Search results

Summary of Contents for Time Guardian Series

Reviews:

Related manuals for Time Guardian Series

Brands by name

Popular brands