Amano Time Guardian Series, Installation And User Manual

Page: 180 / 414

9-52
Time Guardian Series
– Output
a. Operation: Select Poll, Set Time, or Download, When Download is selected, the Poll
before option will be enabled. Check this option if you want to poll the selected terminals
before downloading.
b. Location Setting: The Location Setting lists all Locations that are configured in the Time
& Attendance software. To enable the use of a Location for Auto Process, check the
Active box. To use all the terminals in the Location, select All from the dropdown
Terminal Selection column and the browse indicator will be displayed. Click on the
Browse button in the Terminal column to you choose terminals from the terminal
selection screen.
Note: Setup terminals from Setup Wizard Terminals Setup.
Terminal selection is as follows:
a. To select a terminal, highlight the desired terminal in the Available list and click on the
Add button.
b. To select all terminals from the Available list, click on the Add All button.
c. To remove a terminal from the Selected list, highlight the desired terminal in the
Selected list and click on the Remove button.
d. To remove all selected terminals, click on the Remove All button.
9. If Import or Export is selected for the process type, select the name from the dropdown list.
10. Select “Synchronize Access Control” to run auto process of synchronization upon startup
and/or settings defined on the Recurrence tab.
11. Click on the Recurrence tab. The following is an example of the Recurrence tab window
that will appear:
Daily : The service for the auto process can be run every day or every number of days, or
every number of hours.