Altigen AltiWare ACM 5.1, Administration Manual

Page: 174 / 454

Chapter 12: Trunk Configuration
160 AltiWare ACM 5.1 Administration Manual
Triton Analog Trunk GS/LS Properties
To open a configuration dialog box for a Triton Analog Trunk GS/LS channel, do one of
the following:
•
If you’re in the Trunk Configuration window, select a Triton Analog Trunk GS/LS
channel from the trunk channels list, then click the Trunk Properties button, or just
double-click the channel in the list.
•
If you’re in the Trunk View window, right-click the channel and select Channel
Properties.
Figure 8. Triton Analog Trunk GS/LS Properties window
Note that you can use Apply to in this dialog box to apply changes to other trunks of
the same type.
Parameter Description
Interface Type Select the type of trunk that will interface with this trunk
channel:
•
Loop Start Trunk
•
Ground Start Trunk