24
903
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPv6 Hardware
Access Control List
(ACL) Commands
Introduction
Overview
This chapter provides an alphabetical reference for the IPv6 Hardware Access
Control List (ACL) commands, and contains detailed command information and
command examples about IPv6 hardware ACLs, which are applied directly to
interfaces using the
ipv6 traffic-filter
command.
For information about ACLs, see the
ACL Feature Overview and Configuration
Guide
.
To apply ACLs to an LACP channel group, apply it to all the individual switch ports
in the channel group. To apply ACLs to a static channel group, apply it to the static
channel group itself. For more information on link aggregation see the following
references:
•
the
Link Aggregation Feature Overview and Configuration Guide
.
•
Link Aggregation Commands
Note that text in parenthesis in command names indicates usage not keyword
entry. For example,
ipv6-access-list (named)
indicates named IPv6 ACLs entered
as
ipv6-access-list
<
name
> where <
name
> is a placeholder not a keyword.
Note also that parenthesis surrounding ACL filters indicates the type of ACL filter
not the keyword entry in the CLI, such as
(ipv6 access-list standard IPv6 filter)
represents command entry in the format shown in the syntax
[
<sequence-number
>] {deny|permit} {<
IPv6-source-address/prefix-length
>|any}.
NOTE
:
Hardware ACLs will
permit
access unless
explicitly denied
by an ACL action.
