22
820
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPv4 Hardware
Access Control List
(ACL) Commands
Introduction
Overview
This chapter provides an alphabetical reference of IPv4 Hardware Access Control
List (ACL) commands. It contains detailed command information and command
examples about IPv4 hardware ACLs, which are applied directly to interfaces using
the
access-group
command
To apply ACLs to an LACP channel group, apply it to all the individual switch ports
in the channel group. To apply ACLs to a static channel group, apply it to the static
channel group itself.
•
Text in parenthesis in command names indicates usage not keyword entry.
For example,
access-list hardware (named)
indicates named IPv4 hardware
ACLs entered as
access-list hardware
<
name
> where <
name
> is a
placeholder not a keyword.
•
Parenthesis surrounding ACL filters indicates the type of ACL filter not the
keyword entry in the CLI, such as
(access-list standard numbered filter)
represents command entry in the format shown in the syntax
[<
sequence-number
>] {deny|permit} {<source>|host
<
host-address
>|any}
.
•
Software ACLs will
deny
access unless
explicitly permitted
by an ACL
action.
Sub-modes
Many of the ACL commands operate from sub-modes that are specific to particular
ACL types. The following table shows the CLI prompts at which ACL commands are
entered.
Table 22-1: IPv4 Hardware Access List Commands and Prompts
Command Name
Command Mode
Prompt
show interface access-group
Privileged Exec
awplus#
show access-list (IPv4 Hardware ACLs)
Privileged Exec
awplus#
show interface access-group
Privileged Exec
awplus#
